CAPSA:
Id:
HVE:
EPDS:
FACTS:
CAPSA:
EPDS:
INDUSTRIAL DRIVE - ASSIGNMENT QUESTIONS – SESSIONAL: 1
1.
Derive the equations for
single phase fully-controlled rectifier of DC separately excited motor when
operating at discontinuous conduction mode.
2.
Derive the equation for single
phase half-controlled rectifier of DC separately excited motor when operating
at discontinuous conduction mode.
3.
What are the different types
of load torques? Explain them in detail.
4.
A 210V, 1500 RPM, 200A
separately excited motor has an armature resistance of 0.09 ohms. It is fed
from a single phase fully-controlled rectifier with an AC source voltage of
230V, 50Hz. Assuming continuous conduction, calculate:
(1) Firing angle for rated motor torque and 1000RPM
(2) Firing angle for rated motor torque and -750 RPM
(3) Motor speed for α= 1600 and rated torque.
5.
Explain clearly about
conventional Ward-Leonard drive.
6.
Derive the equivalent values
of drive parameters having loads with both rotational and translational
motions.
FACTS :
1.
Explain the need for transmission
interconnections.
2.
What are the limits of loading capability , explain.
3.
What are the objectives of shunt compensation, explain
in detail
4.
Explain operating principle of TCR. what is
effect of delay angle an amplitude of fundamental TCR current
5.
What is meant by power oscillation damping . explain
how it can be achieve by using static VAR generator
6.
Explain how transient stability enhancement can
be achieved using STATCOM with the help of neat wavefomes.
HVE
1. Discuss the problems associated with peak voltmeter
circuits using passive element .Draw& explain circuit development to over
come these problems.
2. a)How is the wave front wave tiet times controlled in
impulse generated circuits.
b) Explain different methods of producing switching impulses
in test laboratories.
3. Give the schematic arrangement
of an impulse potential divider with a CRO arrangement for measuring
impulse voltages .Explain the arrangement used to minimize the errors.
4. a) Why is a cock croft walten circuit preferred for
voltage multiplier circuit.
b) A 12 stage impulse genera tor has 0.126microfarady
capacitors the wavefront & wavetier resistances are 800ohms&500ohms
respectively. If the load capacitance is 1000pf find the front & tier times
if the impulse wave produced.
5. a) Draw a simplified equivalent circuit of a resistance
potential divider &discuss its step response
b) Explain how s sphere gap is used to measure the high peak
voltages.
6. A cock croft voltantile voltage multiplier has 8 stages
with capacitances all equal to 0.01microfarady. The supply transformer 2degre
voltage is supplied is 10ma, find
a) percentage ripple
b) regulation
c) optimum no. of stages for minimum regulation.
d) Maximum o/p voltage.
-->
Important
questions:
1.a)What are the different circuits
that are used for producing impulse current waves and write down the expressions
b)Give a schematic arrangement of
marx circuits for multistage impulse generation.
2. Explain the cascaded transformer
connection for measuring of high alternating voltages with neat sketches
3.A generating voltmeter has to be designed so that it can
have a range from 20 to 200kv,DC .If the indicating meter reads a minimum
current of 2µA and the
maximum current of 25µA .what
should the capacitance of the generating voltmeter
,Assume that the driving motor has a synchronous speed of 1500rpm.
4.Explain the requirements of an
oscilloscope for impulse measurements in HV test circuits and draw a layout of
HV lap..
IV/IV B.TECH 1ST SEM ASSIGNMENT 2 QUESTIONS:
PSAS:
MID:
SGP:
UEP:
Industrial management:
DBMS:
1.
(a)
What is RAID technology? What are its main goals? What characterizes the levels
in RAID organization? [3 M]
(b)
Explain in detail about B+ trees. [3 M]
2.
Write
short notes on the following: [2 X 3M = 6M]
a.
Join Dependency b. MVD c.
Minimal Cover
3. (a) What are the desirable
properties of decomposition? Explain. [2 M]
(b) By means of relevant example, explain the
steps of algorithm that is used for testing for the lossless (non-additive)
join property. [4 M]
4. (a) Explain in detail about
serializabiity. [3 M]
(b) Define the concepts of recoverable,
cascadeless, and strict schedules, and compare them in terms of their
recoverability. [3 M]
5.
(a)
Discuss the timestamp ordering protocol for concurrency control. [3 M]
(b) How do optimistic concurrency control
techniques differ from
other concurrency control techniques? Discuss the
typical phases
of an optimistic concurrency control method. [3 M]
6.
(a)
Describe the write-ahead logging protocol. [2 M]
(b)
Discuss the NO-UNDO/REDO method of recovery. [2 M]
(c) Briefly explain mandatory access control
technique. [2 M]
UTILIZATION OF ELECTRICAL POWER
1. The distance b/w two stations is 1km and the schedule
speed is 30kmph.station stopping time is 20sec. assume breaking retardation
3km/h/sec & maximum speed 1.25 times the average speed. Determine the
acceleration required to run the service if the speed-time curve is
approximated by a trapezoidal curve?
2. Sub-urban electric train has a max-speed of 70kmph. The
scheduled speed including station stop of 30sec is 45kmph if the acceleration
is 1.5km/h/sec. Find the value of retardation when the average distance stops
is 6kms?
3.The maximum speed of sub urban electric train is 60km/hr
,its schedule speed is 40km/hr and duration of stops is 30 sec ,if the
acceleration is 2km/hr and distance b/w stops is 2km .determine the
detardation.
4.Explain about the indirect resistance heating with one
application ?(Along with neat sketches)
5.What are different types of heat transfer ?Explain heat
transfer methods?
6.Explain indirect arc furnace .
DBMS:
1.
A)Describe the
characteristics of data base approach
b) Discuss about the roles of various actors
in DBMS and explain about various components of DBMS with neat sketch
2.
a)Explain the
diff b/w the Entity ,Entity type ,Entity set
b) Compare &contrast file system with DBMS
and explain the role of DBA and its responsibilities
3.
Explain the
various relational algebra operations with examples and explain different relational
data base constraints
4. (a) Describe
the three-tier architecture of a database system.
(b) What is meant by data independence? Explain.
5. Specify
the following queries on the company database schema, using the relational
operators
show the result of each query in Relational
Algebra, Calculus and SQL.
a) Retrieve the names of all employees in department 5 who work
more than 10 hours per week on the ‘ProductX’ project.
b) List the
names of all employees who have a dependent with the same first name as
themselves.
c) Find the names of all employees who are directly supervised by
‘Franklin Wong’.
6. The
Prescriptions-R-X chain of pharmacies has offered to give you a free lifetime
supply of medicine if you design its database. Given the rising cost of health
care, you agree. Here’s the information that you gather:
a)
Patients are
identified by an SSN, and their names, addresses, and ages must be recorded.
b)
Doctors are
identified by an SSN. For each doctor, the name, specialty, and years of
experience must be recorded.
c)
Each pharmaceutical
company is identified by name and has a phone number.
d)
For each drug,
the trade name and formula must be recorded. Each drug is sold by a given
pharmaceutical company and the trade name identifies a drug uniquely from among
the products of that company. If a pharmaceutical company is deleted, you need
not keep track of its products any longer.
e)
Each pharmacy has
a name, address, and phone number.
f)
Every patient has
a primary physician. Every doctor has at least one patient.
g)
Each pharmacy
sells several drugs and has a price for each. A drug could be sold at several
pharmacies, and the price could vary from one pharmacy to another.
h)
Doctors prescribe
drugs for patients. A doctor could prescribe one or more drugs for several
patients, and a patient could obtain prescriptions from several doctors. Each
prescription has a date and a quantity associated with it. You can assume that,
if a doctor prescribes the same drug for the same patient more than once, only
the last such prescription needs to be stored.
i)
Pharmaceutical
companies have long-term contracts with pharmacies. A pharmaceutical company
can contract with several pharmacies, and a pharmacy can contract with several
pharmaceutical companies. For each contract, you have to store a start date, an
end date, and the text of the contract.
j)
Pharmacies
appoint a supervisor for each contract. There must always be a supervisor for
each contract, but the contract supervisor can change over the lifetime of the
contract.
Draw an ER diagram that captures the preceding information. Identify any
constraints not captured by the ER diagram.
INDUSTRIAL MANAGEMENT:
1. 1. What is
meant by scientific management
2. 2. Write a short notes on father of scientific
management.
3. 3. Describe the features of sole proprietorship.
4. 4. What is meant by partnership firm.
5. 5.What is meant by govt. company .
6. 6..Difference b/w the holding company and statutory
company.
SWITCHGEAR AND PROTECTION
1. Discuss briefly
the role of protective relay in modern power systems .
2. Explain the principle of operation of directional relay
where it is optimum.
3. Explain the principle of following distance
characteristics with the help rs value
a)plain impedance characteristics
b)directional impedance characteristics
c) plain reactance
characteristics
d)mho characteristics
e)offset mho characteristics
4. A 3-phase alternator has a line
voltage of 11kv ,the generator is connected to circuit breaker to inductive resistance upto the circuit
breaker is 5 ohms /phase.The distributed
capacitance upto the circuit breaker
between phase and neutral is 0.01 µf. determine the following
a)peak restriking voltage across circuit breaker
b)frequency of restriking voltage across circuit breaker
c)average breakup restriking
voltage upto peak restraining voltage .
d)maximum rate of rise of restriking
voltage.
5. Explain the arch interruction
process in air braking circuit breaker
incorporating arching hornes arc splitters
magnetic blowout coils
6. Explain the working &
operation of buchholz’s relay
POWER SYSTEM ANALYSIS AND STABILITY
1. A)Prove
that per unit impedance of either side is same.
B)write the
advantages of per unit system.
2. Derive
the expression for average power in terms of symmetrical components
3. Explain
different internal voltages &
impedances of a S.C generator.
4. Derive
poer angle equation of a syn machine connected to infinite bus bar.
5. Draw
the reactance diagram of the power system shown ,the ratings of generator ,
motor & Transformer are given as follows as 50MVA,138kv in 40Ω
line as base values .
G1-20MVA,18KV,X’=20%
G2-20MVA,18KV,X’’=20%
SYN MOTOR: 30
MVA,13.8KV,X’’=20%
3-Phase Y-Y
Transformer:20 MVA,138/20KV,X’=10%
3-Phase Y-Δ
Transformer:15MVA,138/13.8KV,X=10%